background image

 

English     2

 

1

 

Before connecting the AC power cord to the DC adapter outlet, make sure the voltage 
designation of the DC adapter corresponds to the local electrical supply.

 

2

 

Never insert anything metallic into the openings in the cabinet of the Liquid Crystal 
Display (LCD) monitor; doing so may create the danger of electric shock.

 

3

 

To avoid electric shock, never touch the inside of the LCD Monitor. Only a qualified 
technician should open the case of the LCD Monitor.

 

4

 

Never use your LCD Monitor if the power cord has been damaged. Do not allow anything 
to rest on the power cord, and keep the cord away from areas where people can trip over 
it.

 

5

 

Be sure to hold the plug, not the cord, when disconnecting the LCD Monitor from an 
electric socket.

 

6

 

Openings in the LCD Monitor cabinet are provided for ventilation. To prevent overheating, 
these openings should not be blocked or covered. Also, avoid using the LCD Monitor on a 
bed, sofa, rug, or other soft surface. Doing so may block the ventilation openings in the 
bottom of the cabinet. If you put the LCD Monitor in a bookcase or some other enclosed 
space, be sure to provide adequate ventilation.

 

7

 

Put your LCD Monitor in a location with low humidity and a minimum of dust

 

8

 

Do not expose the LCD Monitor to rain or use it near water (in kitchens, near swimming 
pools, etc.). If the LCD Monitor accidentally gets wet, unplug it and contact an authorized 
dealer immediately. You can clean the LCD Monitor with a damp cloth when necessary, 
but be sure to unplug the LCD Monitor first.

 

9

 

Place the LCD Monitor on a solid surface and treat it carefully. The screen is made of thin 
glass with a plastic front surface and can be damaged if dropped, hit or scratched. Do not 
clean the front panel with keton-type materials (e.g., acetone), ethyl alcohol, toluene, 
ethyl acid, methyl, or chloride – these may damage the panel.

 

10

 

Locate your LCD Monitor near an easily accessible AC outlet.

 

11

 

If your LCD Monitor does not operate normally – in particular, if there are any unusual 
sounds or smells coming from it – unplug it immediately and contact an authorized dealer 
or service center.

 

12

 

High temperature can cause problems. Don’t use your LCD Monitor in direct sunlight, and 
keep it away from heaters, stoves, fireplaces, and other sources of heat.

 

13

 

Unplug the LCD Monitor when it is going to be left unused for an extended period of time.

 

14

 

Unplug your LCD Monitor from the AC outlet before any service.

 

CAUTION

 

RISK OF ELECTRIC SHOCK

 

DO NOT OPEN

 

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER 

(OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

 

Safety Instructions

3 S/M 870/770/170 (E) body.FM  Page 2  Wednesday, December 20, 2000  2:00 PM

Содержание SyncMaster 770TFT, 870TFT, 170T































Отзывы: