Samsung SyncMaster 760B, Руководство пользователя

Страница: 20 / 64

10. Monitor driver installation is completed.
Microsoft
®
Windows
®
2000 Operating System
When you can see "Digital Signature Not Found" on your monitor, follow these steps.
1. Choose "
OK
" button on the "
Insert disk
" window.
2. Click the "
Browse
" button on the "
File Needed
" window.
3. Choose A:(D:\Driver) then click the "Open" button and then click " OK " button.
How to install
1. Click " Start " , " Setting " , " Control Panel ".
2. Double click the " Display " Icon.
3. Choose the " Settings " tab and then click " Advanced.. ".
4. Choose "
Monitor
".
5. Click "
Driver
" and then click on "
Update Driver..
" then click on the "Next" button.
6. Choose "
Display a list of the known drivers for this device so that I can choose a
specific driver " then click " Next " and then click " Have disk ".
7. Click the " Browse " button then choose A:(D:\Driver).
8. Click the " Open " button, then click " OK " button.
9. Choose your monitor model and click the " Next " button then click " Next " button.
10. Click the "
Finish
" button then the "
Close
" button.
If you can see the " Digital Signature Not Found " window then click the " Yes "button.
And click the " Finish " button then the " Close " button.
Case1: If the "Properties" button is inactive, it means your monitor is properly configured.
Please stop installation
Case2: If the "Properties" button is active, click the "Properties" button then follow next steps
continually.
Microsoft
®
Windows
®
Millennium Operating System
1. Click " Start " , " Setting " , " Control Panel ".
2. Double click " Display " icon.
3. Select the " Settings " tab and click " Advanced Properties " button.
4. Select the " Monitor " tab.
5. Click the "
Change
" button in the "
Monitor Type
" area.
6. Choose "
Specify the location of the driver
".
7. Choose " Display a list of all the driver in a specific location.. " then click " Next " button.
8. Click the " Have Disk " button
9. Specify A:\(D:\driver) then click " OK " button.
10. Select "
Show all devices
" and choose the monitor that corresponds to the one you
connected to your computer and click "
OK
".
11. Continue choosing " Close " button and " OK " button until you close the Display Properties
dialogue box.
Microsoft
®
Windows
®
NT Operating System
1. Click Start , Settings , Control Panel , and then double-click Display icon.
2. In Display Registration Information window, click Settings Tab and then click All Display
Modes .
3. Select a mode that you wish to use (Resolution, Number of colors and Vertical frequency)
and then click
OK
.
4. Click
Apply
button if you see the screen working normally after clicking
Test
. If the screen is
not normal, change to a different mode (lower mode of resolution, colors or frequency).
If there is no Mode at All Display Modes , select the level of resolution and vertical