English 14
Image Lock:
Image Lock controls adjust for and limit the amount of
noise in the video signal which causes horizontal lines
or areas on the screen where the image appears to be
unstable and jitters or shimmers.
Fine
Coarse
*
The Fine and Coarse adjustments allow you to more
closely adjust your monitor to your preference.
Use the “
–
” and “
+
” buttons to adjust away
interference.
If satisfactory results are not obtained using the Fine
adjustment, use the Coarse adjustment and then use
Fine again.
This function may change the width of the display
image. Use the H-Position menu to center the display
image on the screen.
H-Position
*
V-Position
*
*NOTE: Depending on the video adapter you are using, the lower limit of the control can not
go down to
Min. Number on OSD or go up to Max. Number on OSD
. This is due to
the video signal character istics due to the video graphics adapter, and it narrows
the range of user adjustable parameter. When your LCD monitor detects this video
signal and reaches the limit, it displays information message saying “Limit
Reached” to inform you that the parameter can not be adjusted any further.
Table 2. Screen controls (
Continued
)
Icon
Menus and
Sub-menus
Function Descriptions
–
+
EXIT
MENU
AUTO
EXIT
MENU
AUTO
EXIT
MENU
AUTO
EXIT
MENU
AUTO
EXIT
MENU
AUTO
EXIT
MENU
AUTO
EXIT
MENU
AUTO
EXIT
MENU
AUTO
Adjusting Your LCD Monitor
570V560V-E3p-28p Page 14 Wednesday, May 9, 2001 9:23 AM
