Camera/MIC
1. Camera/MIC Settings
2. Set the transmission type.
3. Set the brightness and contrast for the camera.
4. PIP Screen Location: Set the location of the PIP screen.
(PIP Screen Off, Top Left, Top Right, Bottom Left, Bottom Right)
Some functions of the
Camera/MIC Settings
may be restricted depending on whether the
current mode is
Server
or
Non-Server
mode.
About MCU
z
MCU is a device used for video conference calls. To use the Conference Call function,
Settings > MCU (Multipoint Conferencing Unit) must be set to On.
(For the MCU IP Address and MCU Service Prefix, ask your administrator for this
information.)
MCU
1. MCU Settings: You can hold a video conference with 2 to 6 users.
2. When MCU is On, the MCU IP Address is activated. When it is Off , you cannot use the
Conference Call function.
3. MCU IP Address: You can enter the MCU IP address here.
4. MCU Service Prefix: An MCU video conference type.
(The default type is 80 and an administrator can change the value. To setup the value,
contact your administrator.)
Some
MCU
functions may be restricted depending on whether the current mode is
Server
or
Non-Server
mode.
