EN-3
2
ASSEMBLING THE VACUUM CLEANER
ASSEMBLING ACCESSORIES
1) Attaching the Suction Hose to the
Cleaner
Slide the Suction Hose Clamper to the Suction
Inlet of the Cleaner and Turn it clockwise until
it "clicks" into place.
2) Attaching the Tube to the Suction
Hose
Slide the narrow end of the Suction Hose
section into the end of the tube.
3) Attaching the Floor Nozzle
Slide deeply the free end of the Tube into the
Floor Nozzle.
①
Extending
Holding the narrow side of the tube with a
hand, pull the handle to the opposite side of
it with another hand.
➁
Shortening
Push the handle to the narrow side of
the tube, holding it with another hand.
➤
When attaching to the Suction Hose
➤
When using the Tube
➤
When attaching to the Tube
VC-9800WD-00260H-RU+EN 7/6/05 4:02 AM Page 12
