COLOR CCD CAMERA
User’s Manual
31
COLOR CCD CAMERA
User’s Manual
30
Operating Your Camera
Press the Function Setup switch.
Use the Function Setup switch to move to a desired letter and select the letter by
pressing the Function Setup switch. Repeat this to enter multiple letters.
You can enter up to 15 letters.
Set it to ‘ON’ by using the Function Setup switch.
• When the CAM TITLE menu is ‘OFF’, no
title will be displayed on the monitor
screen even if you enter one.
Notes
• When the CAM TITLE menu is ‘OFF’, no
title will be displayed on the monitor
screen even if you enter one.
Notes
• If you move the cursor to CLR and press the Function Setup switch, all the letters
are deleted. To edit a letter, change the cursor to the bottom left arrow and press
the Function Setup switch. Move the cursor over the letter to be edited, move the
cursor to the letter to be inserted and then press the Function Setup switch.
Notes
SPECIAL
1. CAM TITLE
OFF
2. SYNC
INT
3. MOTION DET
OFF
4. PRIVACY
OFF
5. DIS
OFF
6. COMM ADJ
7. LANGUAGE
ENGLISH
8. RESET
9. RETURN
Camera ID
A B C D E F G H I J K L M
N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m
n o p q r s t u v w x y z
- . 1 2 3 4 5 6 7 8 9
C L R P O S E N D
When the SPECIAL menu screen is displayed,
press the Function Setup switch so that the arrow indicates ‘MOTION DET’.
Enter a title, move the cursor to ’POS’ and
press the Function Setup switch. The entered
title appears on the screen. Select the position
to display the title on the screen by using the
Function Setup switch and press. When the
position is determined, select ’END’ and press
the Function Setup switch to return to the
SPECIAL menu.
MOTION DET:
If you connect an alarm device to this camera, you
can monitor activity more efficiently, because a
signal is generated by the camera whenever
motion is detected.
• When using AC power at 60Hz frequency, you can use the L/L type synchronization.
• When the power is DC 12V, the SYNC menu is fixed to the ‘INT’ mode.
Notes
SYNC : In areas where the supply is at 60Hz, you can
synchronize the output phase of multiple
cameras using the power synchronization
function (Line-Lock) without using a
synchronization signal generator.
- INT : Internal Synchronization Type
- L/L : Power Synchronization Type, Line-lock
• Press the Function Setup switch.
• You can select a desired phase from 0 to 359 when select 'phase'.
• You can decide the synchronization between luminance and color signal when
select the 'mode'.
to Locate, then SET
to Locate, then SET
FRONT DOOR
