COLOR CCD CAMERA
User’s Manual
25
COLOR CCD CAMERA
User’s Manual
24
Operating Your Camera
• You cannot use the WDR mode when MANUAL or A.FLK mode in ‘SHUTTER’
menu is selected.
• Since the following symptoms may occur according to the ambient illumination
when WDR is selected, set it to OFF.
Color or screen changes unnaturally.
Noise appears in the bright part of the screen.
• Since the performance of the WDR function may be affected by the area of the
bright part of the screen, optimize the installation angle for the best WDR
performance.
• If you increase LIMIT, the screen display may be distorted.
Notes
This function reduces the background noise in a low luminance environment.
1. When the SETUP menu screen is displayed, select ’SSNR’ by using the Function
Setup switch so that the arrow indicates ’SSNR’ .
2. Select a desired mode using the Function Setup switch.
OFF : Deactivates SSNR. Noise is not reduced.
ON : Activates SSNR so that noise is reduced.
SSNR
MAIN SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
ATW
4.BACKLIGHT
OFF
5.SSNR
ON
6.DAY/NIGHT
AUTO
7.IMAGE ADJ
8.SPECIAL
3. Set the SSNR mode to ‘ON’ and press the Function Setup switch. Then you can
adjust the noise reduction level.
• You cannot set the SSNR to ‘ON’ or ‘OFF’ when the AGC mode of the EXPOSURE
menu is ‘OFF’.
• When adjusting the noise reduction level of the SSNR mode, remember that the
higher the level set, the more the noise level will be reduced but that after image
may also occur.
Notes
