7
Operation
C
h
a
p
te
r
2
Press the
Interphone
button with
the handset picked up.
These functions enable you to make internal calls when another monitor is installed.
*OUFSQIPOF'VODUJPOT 0QUJPOBM
ⶺ
Making internal calls
A melody sounds from sub-phone.
1. If internal calls are not answered for one minute, the calls are disconnected.
2. Internal calls are automatically hung up after 3 minutes.
Now, you can accept the call with
the handset of the subphone.
To hang up the call;
During the speakerphone mode,
press the
Call
button of the
Monitor, during the handset mode,
replace the handset of the Monitor.
ⷅ
An incoming bell signal occurs in another
monitor
ⷅ
If the current call is switched to speakerphone mode
by pressing the
Call
button in handset mode, you can
continue the call in speakerphone mode after
replacing the handset.
/PUF
6
These functions enable you to check the status outside the entrance.
&OUSBODF'VODUJPOT
If you repeatedly press the
Call
button, the entrance hall images are displayed in turn.
If you press the Call button in standby mode, the entrance image is displayed on the screen and
a call is connected.
ⷅ
If you press the Call button with the handset picked up, the phone is connected in handset mode.
If you press the Call button in standby mode, the phone is connected in speakerphone mode.
ⶺ
Checking outdoor status
ⷅ
The outdoor image screen is automatically turned off after 50 ~ 60 seconds.
ⷅ
Doorbells and multi panels do not support
“
Checking outdoor status.
”
ⷅ
You can open the entrance door by pressing the
Door Open
button while the outdoor image is displayed.
When there are two or more door pins
When there is one door pin
ⷅ
The outdoor image can be displayed for up to one
minute.
ⷅ
You can open the entrance door by pressing the
Door
Open
button while the outdoor image is displayed.
Содержание SVD-4332
Страница 1: ...Z6806140601A GC68 01539A ED 02 ...
Страница 2: ......