Samsung SV-M10K, Руководство пользователя

Страница: 7 / 9

LINE
IN 1
AUDIO
VIDEO
LINE
OUT
TV
ENG-7
Recording From TV
LINE
IN 1
AUDIO
VIDEO
LINE
OUT
TV
L H
ON
OFF
ON
OFF
OUT TO TV
V IDEO OUT
TEST
AUDIO OUT
IN FROM ANT.
ATT
VCR
ANTENNA IN
RF OUT
AUDIO IN
VIDEO IN
AUDIO OUT VIDEO OUT
1
Turn on the TV. Tune your TV channel.
2
Connect your VCR to the TV by A/V cable as above
figure.
3
Select the recording speed (SP/LP) by pressing the
SPEED button.
4
Hold down the REC (
●
) button to start line
recording.
5
Press the STOP ( ■ ) button to end line recording.
➢
Line recording is not available for the TV which
has no A/V OUTPUT JACK.
Recording from Another VCR
1 Turn on the TV.
2 Connect the playback side VCR’s A/V cable
to the recording side VCR’s video and audio
in (rear panel).
3 Select the recording speed (SP/LP) by
pressing the SPEED button.
4 Begin playback on the playback side VCR
and hold down REC (
●
) button.
5 Press the STOP (
■
) button to end line
recording.
You can copy a cassette to your VCR from another
video source, such as another VCR.
☛
It is an infringement of copyright laws to copy
prerecorded cassettes or to re-record them in any
form without the permission of the owners of the
corresponding copyright.
➢
Video cassettes have a safety tab to prevent accidental
erasure. When this tab has been removed, you cannot
record on the tape.
◆ If you wish to protect a cassette, break off the tab
using a small screwdriver.
◆
To re-record over a protected cassette (safety tab
broken), cover the hole with adhesive tape.
TV
AUDIO OUT
VIDEO OUT
RF OUT
ANTENNA IN
AUDIO OUT
VIDEO OUT
02130A SV-M10K/DIN-GB 4/9/04 2:37 PM Page 7