background image

ENG-12

The number of stations automatically 
stored by the VCR depends on the 
number of stations that it has found. 

8

If you wish to cancel the auto scanning before the 
end, press the MENU button three times to exit the
menu.

Once the auto scanning procedure 

has finished, some stations may 
have been stored more than once; 
select the stations with the best 
reception and delete the ones no 
longer required (see page 13).

You do not need to preset the stations if 
you have already set them automatically 
(see Plug & Auto Set Up on page 10).

Your VCR contains a built-in tuner used to
receive television broadcasts. 
You must preset the stations received through
the tuner. This can be done:

Plug & Auto Set up (see page 10) 

Automatically

Manually  (see page 13)

You can store up to 80 stations.

To enable the VCR to decode a

scrambled TV station, the decoder

must be activated after the scan

(see pages 13).

1

Press the MENU button on the remote control.
Result:   The programming menu is displayed.

2

Press the corresponding  , 

or 

buttons to 

select the 

INSTALLATION

option.

3

Press the OK button to select this option.
Result:   The 

INSTALLATION 

menu is displayed.

4

Press the corresponding

or 

buttons, until 

the 

AUTO SET UP

option is selected. And then 

press the 

button to select this option. 

5

Press the 

or

buttons to select your country.

(SV-675GX/ SV-671GX only)

The VCR searches for the stations 
according to a preset preference list 
corresponding to the country that you have 
selected. 

6

Press the corresponding 

or

buttons to 

select the your SYSTEM SELECT. Press the 
OK button to start this option.

7

Press OK to start the auto scanning.
Result: 

◆ 

The 

PLEASE WAIT

indication flashes 

on the television screen. 

◆ 

The first frequency band is scanned 

and the first station found is displayed 
and stored.

◆ 

The VCR then searches for the second 

station and so on.

◆ 

When the automatic scanning 

procedure has finished, the VCR 

switches automatically to programme1.

Presetting the Stations Automatically

02119L SV-675GX/EUR-eng  3/15/04 10:53 AM  Page 12

Содержание SV-270GX

































Отзывы: