ENG-10
Tuning Your Television for the VCR
You must tune your television for the VCR only if you
are not using a Scart cable
➢
To view pictures from your VCR when a Scart cable
is used, the television must be set to the
audio/video mode (AV).
1
Switch on the television.
2
witch on the VCR by pressing STANDBY/ON on
the front of the VCR or VCR STANDBY/ON
(STANDBY/ON) on the remote control.
3
Select a programme position on the television to
be reserved for use with your VCR.
4
Insert the video cassette in the VCR. Check that
the VCR starts reading the cassette; if not, press
❿
II
button.
5
Start a scan on your television or set the television
to UHF channel 36.
6
Fine tune the television until the pictures and sound
are obtained clearly.
7
If you cannot find the pictures and sound, or there
is interference from nearby channels, it may be
necessary to change the setting of the VCR output
channel (see Setting the VCR Output Channel on
page 11 and Problems and Solutions on page 30p).
8
When the picture and sound are perfectly clear,
store this channel at the desired programme
position on the television.
Result: That programme is now reserved for use
with your VCR.
our VCR contains a 24-hour clock and calendar used
to:
◆
Automatically stop programme recording
◆
Preset your VCR to record a programme
automatically
You must set the date and time when:
◆
You purchase the video cassette recorder
☛
◆
Do not forget to reset the time when
you change clocks from winter to
summer time and vice versa.
1
Press MENU on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
,
❷
or
➛
,
❿
buttons to
select the
CLOCK SET
option.
3
Press the OK button to select this option.
Result: The
CLOCK SET
menu is displayed.
4
Press
➛
or
❿
to select the hour, minutes, day,
month and year.
Result: The option selected flashes.
5
Press the
or
❷
buttons to increase or decrease
the value.
Result: The day of the week is displayed
automatically.
➢
You can hold the
or
❷
buttons down to
scroll more quickly through the values.
6
On completion, press MENU twice to exit the
menu.
Setting the Date and Time
02119L SV-675GX/EUR-eng 3/15/04 10:53 AM Page 10
