operating the cleaner
_9
Operating the cleaner
02 O
PERA
TING
T
h
E
cl
EANER
SWITch OPERATION
Power and Brush Roll on/off
The Power on/off button is located on the top of vacuum body.
Turn on vacuum by power button after plugging cord into
electrical outlet.
The brush roll on/off button turns the rotating floor brush on and off.
Turn brush roll on to clean carpet and rugs.
Turn brush roll off to clean hard surface floors.
The floor brush will automatically turn off when the handle is
in the upright position.
Auto Power Control with Dirt Sensor
Your vacuum cleaner is equipped with the latest technology in
floor care. Press the 'auto power control' button to operate the
vacuum to suction power automatically. The 'auto power control'
button will light up green. Dirt sensor automatically control
suction power depending on the amount of dirt and shows the
status through the dirt sensor lights. MIN power for everyday pick
up, MID power for normal dirt, and MAX power for deep cleaning
high traffic areas. As you vacuum, the dirt sensor light MAX
will come on and stay on as long as the sensor detects a high
concentration of particles passing through the vacuum cleaner.
MIN
=
When there is little or no dirt present, indicating that the dirt sensor is at MIN.
At MIN power the vacuum cleaner operate at low energy consumption and noise levels.
MID
=
With normal dirt concentration, indicating that dirt sensor is at MID.
Energy consumption and noise levels increase.
MAX
=
With heavy dirt concentration, indicating that dirt sensor is at MAX.
The vacuum cleaner operates at its highest energy consumption and noise levels.
Do not use the automatic setting to vacuum lightweight materials or curtains.
These could be sucked in and possibly damaged.
Power C, -)
If you want to de-activate the auto power control mode and control suction power
manually, press the power control (+,-) button.
Press the + button to select a higher suction power level.
Press the - button to select a lower suction power level.
Performance Indicator
When the unit is running with normal air flow, the light on the performance indicator is off.
The light comes on whenever the airflow becomes blocked. If this happens, turn switch off
and unplug the cleaner. Inspect the inlets, hose, diverter, and filters for any blockages, and
then empty the dust bin and clean filters.
The performance Indicator lights up red when the dust bin and filters require
checking or emptying.
Before the performance indicator lights up red, the dust bin needs to be emptied
when the dirt reaches the "MAX" line on the side of it, then the suction power and
filter maintenance cycles will be prolonged.
CAUTION
DIRT SENSOR LIGHTS
MIN
MID
MAX
Auto Power
Control
Brush roll on/off
Power
Control -
Power on/off
Power
C
Dirt Sensor
Lights
Performance
Indicator
