assembling the cleaner
_7
Assembling the cleaner
01 A
SSEM
bl
ING
T
h
E
cl
EANER
1
5
2
6
3
7
4
8
1
(1) Slide fully retracted telescopic pipe into the handle until you hear a click.
(2) Slide fully retracted vacuum hose into the handle until you hear a click.
(3) Slide fully retracted pop-up brush into the telescopic pipe until you hear a click.
2
Stand the vacuum upright and place the base of the handle firmly into the groove at
the top of the vacuum body.
3
Push the handle forward to fit to the vacuum body.
4
Attach the two hose guides by lining up the tab with the corresponding notch on the
side of the vacuum body and turn it clockwise as shown.
5
Slide slot in vacuum hose end over tab on control tube.
Turn hose to right to secure tab in slot.
6
Attach the vacuum hose guide by lining up the tap on the base with the
corresponding notch on the back of the vacuum body as shown.
7
Extend the vacuum hose and fix into the two hose guides down the side of the
vacuum body.
8
Place the dusting brush and crevice tool into the tool holder on top of the dust bin.
