Samsung STP131 Series, Руководство оператора

Страница: 20 / 24

39 40
GS H n
[Name]
[Format]
[Description]
Select printing position of HRI characters.
ASCII
Hex
Decimal
Selects the printing position of HRI characters when printing a bar code.
n selects the printing position as follows:
ESC
1B
27 H
48
72 n
n
n
GS I n
[Name]
[Format]
[Range]
[Description]
Transmit printer ID.
ASCII
Hex
Decimal
1 < n < 3, 49 < n < 51
Transmits the printer ID specified by n as follows:
GS
1D
29 I
49
73 n
n
n
GS L nL nH
[Name]
[Format]
[Range]
[Description]
Set left margin.
ASCII
Hex
Decimal
1 < nL < 255
0 < nH < 255
Set the left margin using nL and nH.
The left margin is set to [(nL + nH x 256) x horizontal motion unit)]
inches.
Printable area
Printing area width Left margin
GS
1D
29 L
4C
76 nL nH
nL nH
nL nH
0, 48
1, 49
2, 50
3, 51
n
Not printed.
Above bar code.
Below bar code.
Both above and below the bar code.
Printing postion
HRI indicates Human Readable Interpreatiion.
1, 49
2, 50
3, 51
n
Printer mode ID
Type ID
ROM version ID
Printer ID
STP130S/STP130P
Depends on ROM version
Specification
30
02
10
ID (hexadecimal)
GS P x y
[Name]
[Format]
[Range]
[Description]
Set horizontal and vertical motion units.
ASCII
Hex
Decimal
1 < x < 255
0 < y < 255
Sets the horizontal and vertical motion units to approximately 25.4/x mm
{1/x inch and} and approximately 25.4/y mm {1/y inches}, respectively.
When x and y are set to 0, the default setting of each value is used
GS
1D
29 P
50
80 x y
x y
x y
GS V m, GS V m n
[Name]
[Format]
[Range]
[Description]
Select cut mode and cut paper.
ASCII
Hex
Decimal
ASCII
Hex
Decimal
m = 1, 49
m = 66, 0 < n < 255
Selects a mode for cutting paper and exectes paper cutting.
The value of m selects the mode as follows:
GS
1D
29
GS
1D
29 V
56
86
V
56
86 m
m
m
m n
m n
m n
GS W nL nH
[Name]
[Format]
[Range]
[Description]
Set printing area width.
ASCII
Hex
Decimal
0 < nL < 255
0 < nH < 255
Set the printing area width to the area specified by nL and nH.
The printing area width is set to [(nL + nH x 256) x horizontal motion unit)]
inches.
Printable area
Printing area width Left margin
GS
1D
29 W
57
87 nL nH
nL nH
nL nH
1
1
1
2
2
2
0, 1, 49
66
m
Partial cut (one point center uncut)
Feeds paper (cutting po [n x )vertical motion unit)]), and
cuts the paper partially (one point center uncut).
Print mode