Samsung STP131 Series, Руководство оператора

Страница: 12 / 24

Control Commands
HT
[Name]
[Format]
[Description]
Horizontal tab.
ASCII
Hex
Decimal
Moves the print position to the next horizontal tab position.
HT
09
9
LF
[Name]
[Format]
[Description]
Print and line feed.
ASCII
Hex
Decimal
Prints the data in the print buffer an feeds one line based on the current
line spacing.
LF
0A
10
FF
[Name]
[Format]
[Description]
Print and return o standard mode in page mode.
ASCII
Hex
Decimal
Prints the data in the print buffer collectively and returns to standard mode.
FF
0C
12
CR
[Name]
[Format]
[Description]
Print and carriage return.
ASCII
Hex
Decimal
When automatic line feed is enabled, this command functions the same as
LF ; when automatic line feed is disabled, this command is ignored.
HT
0D
13
CAN
[Name]
[Format]
[Description]
Cancel print data in page mode.
ASCII
Hex
Decimal
In page mode, deletes all the print data in the current printable area.
CAN
18
24
Partiall cut(one point center uncut)
General pulse
Select character code table
Turn upside-down printing mode on/off
Select character size
Define downloaded bit image
Print downloaded bit image
Start/end macro definition
Turn white/black reverse printing mode on/off
Select printing position of HRI characters
Transmit print ID
Set left margin
Set vertical and horizontal motion units
Select cut mode and cut paper
Set printing area width
Execute macro
Select font for HRI characters
Set bar code height
print bar code
Transmit status
Set bar code width
( )
Command classification
Standard mode
Disabled
Ignored
Executing :
:
:
: Enagled
Enabled only when the command is used at the beginning of a line.
Enabled only when data is not present in the buffer.
Page mode
:
:
:
: Enagled
Only setting is possible.
Parameters are processed as printable data.
Command codes and parameters are all ignored.
Printer executes the command, which does not affect the following data.
Setting : Printer uses flags to make setting, and those setting affect the following data.
ESC i
ESC p
ESC t
ESC {
GS !
GS *
GS /
GS :
GS B
GS H
GS I
GS L
GS P
GS V
GS W
GS ^
GS f
GS h
GS k
GS r
GS w
( )
( )
( )
( )
Command Name
Command Classification
Executing Setting
Standard
Mode
23 24