15
English
INS
TALLA
TION
Installing the wall mount
CAUTION
• The wall mount's mounting screws must be affixed to a hard wall or underlying wall stud.
– If you install the wall mount on a plaster board wall, you must screw the
supporting screws into an underlying stud.
Installing the wall mount
Groove for fixing
the wall mount
Screws
Screw
Anchors
118 cm
01
Remove the rubber cap from the
groove for fixing the wall mount.
02
Set the height of the wall mount
installation so that top of the wall
mount will be 118 cm from the floor.
03
Using the wall mount as a template,
mark where the top and bottom screw
holes will be placed.
04
Drill the holes using a 6 mm drill bit.
Fix the wall mount to the wall with the
provided screws. Re-Insert the rubber
cap into the groove for fixing the wall
mount.
05
Plug in the wall mount, place the vacuum
into the wall mount, and then confirm
that the battery level indicator is on.
Disassembling the wall mount
1
2
01
02
3
02
01
4
5
❇
❇
❇
❇
When re-assembling the wall mount, make sure the cables are placed as shown in the
illustration.
1_Stick_VS8000-V2_EN_00803F-00_SB.indd 15
2018-03-08 오전 12:03:45
Содержание SS75N80 Series
Страница 57: ...2_Stick_VS8000 V2_RU_00803F 00_SB indd 28 2018 03 08 오전 12 04 09 ...
Страница 85: ...3_Stick_VS8000 V2_ET_00803F 00_SB indd 28 2018 03 08 오전 12 04 12 ...
Страница 113: ...4_Stick_VS8000 V2_LV_00803F 00_SB indd 28 2018 03 08 오전 12 04 25 ...
Страница 141: ...DJ68 00803F 00 5_Stick_VS8000 V2_LT_00803F 00_SB indd 28 2018 03 08 오전 12 04 53 ...