Spinpoint
T133S
series
• Serial ATA 3.0 Compliant
• Fluid Dynamic Bearing Spindle Motor Technology
• High Speed Dual Digital Signal Processor (DSP) Based Architecture
• ATA S.M.A.R.T. Compliant
• ATA Security Mode Feature Set
• ATA Host Protected Area Feature Set
• ATA Automatic Acoustic Management Feature Set
• ATA 48-bit Address Feature Set
• ATA Streaming Feature Set
3
• ATA Device Configuration Overlay Feature Set
• Multi-Burst On-The-Fly Error Correction
• NoiseGuard™
• SilentSeek™
300.0/400.0GB
Capacity
1
Model
SATA,8MB
300GB
HD300LJ
400GB
HD400LJ
DRIVE CONFIGURATION
Interface
Serial ATA 3.0
Bytes per Sector
512
Buffer DRAM Size
2
8 MB
PERFORMANCE SPECIFICATIONS
Read Seek Time (typ.)
-Track to track
0.8 ms
-Average
8.9 ms
-Full Stroke
18 ms
-Average Latency
4.17 ms
-Rotational Speed
7,200 rpm
Maximum Data Transfer Rate
-Media to/from Buffer(max.)
742/1000 Mbits/sec
-Buffer to/from Host
300 MB/sec
Drive Ready Time(typ.)
10 sec
RELIABILITY SPECIFICATIONS
Non-recoverable Read Error
1 sector in 10
14
bits
MTBF
600,000 POH
Start/Stop Cycles(Ambient)
50,000
Component Design Life
5 years
ACOUSTICS (AVERAGE SOUND POWER)
-Idle
2.7 Bel
-Random Read/Write
2.9 Bel
ENVIRONMENTAL SPECIFICATIONS
Temperature
-Operating
0~60°C
-Non-operating
-40~70°C
-Thermal Gradient (max.)
20°C/hr
Humidity (non-condensing)
-Operating
5~90 %
-Non-operating
5~95 %
Linear Shock (1/2 sine pulse)
-Operating, 2ms
63 G
-Non-operating, 2ms
300 G
Vibration (swept sine, 0.5 octave per minute)
Operating
5 - 300 - 5 Hz
1.0 G0-p
Non-operating
5 - 500 - 5 Hz
2.0 G0-p
Altitude (relative to sea level)
-Operating
-1,000 to 10,000 feet
-Non-operating
-1,000 to 40,000 feet
POWER REQUIREMENTS
Voltage
+5V°
5% / +12V°
10%
Spin Up Current(max.)
880 / 2250 mA
Seek
4
(typ.)
9.4
5
W
Read on-Track(typ.)
8.7
5
W
Idle(typ.)
7.2
5
W
Standby(typ.)
0.6
5
W
Sleep(typ.)
0.6
5
W
PHYSICAL DIMENSION
Height
1 in
Width
4 in
Depth
5.75 in
Weight
1.44 lb
Specifications are subject to change without notice.
1. 1MB=1,000,000 Bytes 1GB=1,000,000,000 Bytes
*Accessible capacity may vary as some OS uses binary
numbering system for reported capacity
2. 128KB is used for firmware
3. For ATA-6 interface models only
4. 30% duty cycle, random seek
5. Power based on enabled DIPM and SATA 3.0Gbps speed
*Notes:Design and specifications are subject to change
without prior notice