Samsung SPH-M560, Руководство пользователя

Страница: 201 / 222

Im
por
ta
n
t Sa
fe
ty
In
for
m
a
ti
on
4A. Important Safety Information 185
They’re also available at www.sprint.com — click Accessories .
Buying the right batteries and accessories is the best way to
ensure they’re genuine and safe.
䢇 In order to avoid damage, charge the battery only in
temperatures that range from 32° F to 113° F (0° C to 45° C).
䢇 Don’t use the battery charger in direct sunlight or in high
humidity areas, such as the bathroom.
䢇 Never dispose of the battery by incineration.
䢇 Keep the metal contacts on top of the battery clean.
䢇
Don’t attempt to disassemble or short-circuit the battery.
䢇
The battery may need recharging if it has not been used for
a long period of time.
䢇
It’s best to replace the battery when it no longer provides
acceptable performance. It can be recharged hundreds of
times before it needs replacing.
䢇
Don’t store the battery in high temperature areas for long
periods of time. It’s best to follow these storage rules:
Less than one month:
-4° F to 140° F (-20° C to 60° C)
More than one month:
-4° F to 113° F (-20° C to 45° C)
Disposal of Lithium Ion (Li-Ion) Batteries
Do not handle a damaged or leaking Li-Ion battery as you can
be burned.
For safe disposal options of your Li-Ion batteries, contact your
nearest Sprint authorized service center.
Special Note : Be sure to dispose of your battery properly. In
some areas, the disposal of batteries in household or business
trash may be prohibited.
Radio Frequency (RF) Energy
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When
it’s turned on, it receives and transmits radio frequency (RF)
signals. When you use your phone, the system handling your
call controls the power level. This power can range from 0.006
watt to 0.2 watt in digital mode.
Knowing Radio Frequency Safety
The design of your phone complies with updated NCRP
standards described below.
In 1991–92, the Institute of Electrical and Electronics Engineers
(IEEE) and the American National Standards Institute (ANSI)
joined in updating ANSI’s 1982 standard for safety levels with
respect to human exposure to RF signals. More than 120
scientists, engineers and physicians from universities,
government health agencies and industries developed this
updated standard after reviewing the available body of
research. In 1993, the Federal Communications Commission
(FCC) adopted this updated standard in a regulation.
Sprint M560.book Page 185 Tuesday, March 2, 2010 3:37 PM