Getting Started 4
Section 1: Getting Started
Getting up and running is a quick and easy set of
steps. This section walks you through the steps
necessary to install your battery pack, turn on your
phone, setup service, and make your first call.
Installing the Battery
1.
Press down on the rear cover (label side) with
your thumbs, as indicated below, and while
applying some pressure, slide the cover away.
2.
Insert the battery (label side up as shown) into
the battery compartment so that the metal
contacts on the phone match up with those on
the battery.
Warning!:
Use only Virgin Mobile-approved or Samsung-
approved batteries and chargers with your phone.
Failure to use these approved devices may increase
the risk that your phone will overheat, catch fire, or
explode, resulting in serious bodily injury, death, or
property damage.
3.
Position the battery cover over the battery (3)
and firmly slide it in until you hear a click (4).
paylo M340.book Page 4 Monday, July 19, 2010 3:14 PM