Samsung SPC-6000 Скачать руководство пользователя страница 52

for all modules it contains, plus any associated interface definition files, plus the 

scripts used to control compilation and installation of the library. 
Activities other than copying, distribution and modification are not covered by this 

License; they are outside its scope. The act of running a program using the Library 

is not restricted, and output from such a program is covered only if its contents 

constitute a work based on the Library (independent of the use of the Library in 

a tool for writing it). Whether that is true depends on what the Library does and 

what the program that uses the Library does. 

1.

  You may copy and distribute verbatim copies of the Library’s complete source 

code as you receive it, in any medium, provided that you conspicuously and 

appropriately publish on each copy an appropriate copyright notice and 

disclaimer of warranty; keep intact all the notices that refer to this License and 

to the absence of any warranty; and distribute a copy of this License along 

with the Library. 

You may charge a fee for the physical act of transferring a copy, and you may at 

your option offer warranty protection in exchange for a fee. 

2.

  You may modify your copy or copies of the Library or any portion of it, 

thus forming a work based on the Library, and copy and distribute such 

modifications or work under the terms of Section 1 above, provided that you 

also meet all of these conditions: 

a) The modified work must itself be a software library. b) You must cause the 

files modified to carry prominent notices stating that you changed the files and 

the date of any change. c) You must cause the whole of the work to be licensed 

at no charge to all third parties under the terms of this License. d) If a facility in 

the modified Library refers to a function or a table of data to be supplied by an 

application program that uses the facility, other than as an argument passed when 

the facility is invoked, then you must make a good faith effort to ensure that, in 

the event an application does not supply such function or table, the facility still 

operates, and performs whatever part of its purpose remains meaningful. (For 

example, a function in a library to compute square roots has a purpose that is 

entirely well-defined independent of the application. Therefore, Subsection 2d 

requires that any application-supplied function or table used by this function must 

be optional: if the application does not supply it, the square root function must 

still compute square roots.) These requirements apply to the modified work as a 

whole. If identifiable sections of that work are not derived from the Library, and can 

be reasonably considered independent and separate works in themselves, then 

this License, and its terms, do not apply to those sections when you distribute 

them as separate works. But when you distribute the same sections as part of a 

whole which is a work based on the Library, the distribution of the whole must be 

on the terms of this License, whose permissions for other licensees extend to the 

entire whole, and thus to each and every part regardless of who wrote it. 
Thus, it is not the intent of this section to claim rights or contest your rights to 

work written entirely by you; rather, the intent is to exercise the right to control the 

distribution of derivative or collective works based on the Library. 
In addition, mere aggregation of another work not based on the Library with 

the Library (or with a work based on the Library) on a volume of a storage or 

distribution medium does not bring the other work under the scope of this 

License. 

3.

  You may opt to apply the terms of the ordinary GNU General Public License 

instead of this License to a given copy of the Library. To do this, you must alter 

all the notices that refer to this License, so that they refer to the ordinary GNU 

General Public License, version 2, instead of to this License. (If a newer version 

than version 2 of the ordinary GNU General Public License has appeared, 

then you can specify that version instead if you wish.) Do not make any other 

change in these notices. 

Once this change is made in a given copy, it is irreversible for that copy, so the 

ordinary GNU General Public License applies to all subsequent copies and 

derivative works made from that copy. 
This option is useful when you wish to copy part of the code of the Library into a 

program that is not a library. 

4.

  You may copy and distribute the Library (or a portion or derivative of it, 

under Section 2) in object code or executable form under the terms of 

Sections 1 and 2 above provided t hat you accompany it with the complete 

corresponding machine-readable source code, which must be distributed 

under the terms of Sections 1 and 2 above on a medium customarily used for 

software interchange. 

If distribution of object code is made by offering access to copy from a 

designated place, then offering equivalent access to copy the source code from 

the same place satisfies the requirement to distribute the source code, even 

though third parties are not compelled to copy the source along with the object 

code. 

5.

  A program that contains no derivative of any portion of the Library, but is 

designed to work with the Library by being compiled or linked with it, is called 

a “work that uses the Library”. Such a work, in isolation, is not a derivative 

work of the Library, and therefore falls outside the scope of this License. 

However, linking a “work that uses the Library” with the Library creates an 

executable that is a derivative of the Library (because it contains portions of the 

Library),  rather than a “work that uses the library”.  

The executable is therefore covered by this License. Section 6 states terms for 

distribution of such executables. 
When a “work that uses the Library” uses material from a header file that is part of 

the Library, the object code for the work may be a derivative work of the Library 

even though the source code is not. Whether this is true is especially significant 

if the work can be linked without the Library, or if the work is itself a library. The 

threshold for this to be true is not precisely defined by law. 
If such an object file uses only numerical parameters, data structure layouts 

and accessors, and small macros and small inline functions (ten lines or less in 

length), then the use of the object file is unrestricted, regardless of whether it is 

legally a derivative work. (Executables containing this object code plus portions of 

the Library will still fall under Section 6.) 
Otherwise, if the work is a derivative of the Library, you may distribute the object 

code for the work under the terms of Section 6. Any executables containing that 

work also fall under Section 6, whether or not they are linked directly with the 

Library itself. 

6.

  As an exception to the Sections above, you may also combine or link a “work 

that uses the Library” with the Library to produce a work containing portions 

of the Library, and distribute that work under terms of your choice, provided 

that the terms permit modification of the work for the customer’s own use and 

reverse engineering for debugging such modifications. 

You must give prominent notice with each copy of the work that the Library is 

used in it and that the Library and its use are covered by this License. You must 

supply a copy of this License. If the work during execution displays copyright 

notices, you must include the copyright notice for the Library among them, as 

well as a reference directing the user to the copy of this License. Also, you must 

do one of these things: 
a)  Accompany the work with the complete corresponding machine-readable 

source code for the Library including whatever changes were used in the work 

(which must be distributed under Sections 1 and 2 above); and, if the work 

is an executable linked with the Library, with the complete machine readable 

“work that uses the Library”, as object code and/or source code, so that the 

user can modify the Library and then relink to produce a modified executable 

containing the modified Library. (It is understood that the user who changes 

the contents of definitions files in the Library will not necessarily be able to 

recompile the application to use the modified definitions.) 

b)  Use a suitable shared library mechanism for linking with the Library. A suitable 

mechanism is one that 

(1) uses at run time a copy of the library already present on the user’s computer 

system, rather than copying library functions into the executable, and (2) will 

operate properly with a modified version of the library, if the user installs one, as 

long as the modified version is interface-compatible with the version that the work 

was made with. 
c)  Accompany the work with a written offer, valid for at least three years, to give 

the same user the materials specified in Subsection 6a, above, for a charge no 

more than the cost of performing this distribution.

Содержание SPC-6000

























































Отзывы: