57
56
S
Y S T E M
S
Y S T E M
Between Handsets
(Available only when you have more than one handset)
If you have multiple handsets registered with the base, two handsets
can talk to each other on an internal intercom call, while a third handset
can be on an external call.
1. Press
key on your handset.
INTERCOM ->
is displayed and the
cursor blinks.
2. Enter the number of the handset (1-5) you want to page.
3. The handsets ring. The LCD window on the paged handset displays
your handset number.
Notes:
• If you enter a handset number that does not exist, the handset
shows
IT IS NOT REGISTERED
and sounds an error tone.
• To cancel intercom, close the flip or press either
or
key.
• You cannot adjust the intercom ringer volume.
4. To answer the call from you, the paged handset should open the flip or
press either
or
key.
5. When the paged handset answers you, speak.
6. To end the call, close the flip or press either
or
key.
Notes:
• If an external call comes in during an intercom conversation, you will
hear beeps. When you hear the low beeps, finish the intercom call by
pressing
or
key. The external ring sounds. Press
key to
answer the call.
• When you make an intercom call, if
Busy
appears in the display and
you cannot communicate with the paged handset, the paged handset
is engaged with an outside party. Your handset is automatically
camped on to the busy station, and when the busy station becomes
free, both handsets will ring.
• When you make an intercom call, if
INTERCOM IS USED
is shown in
your display, the handset you tried to connect with is engaged with
another internal line.
INT
INT
INT
INT
INT
Intercom
From the Base to the Handset
1. Press
key and enter the number of the handset that you wish to
communicate with.
2. The base and the paged handset ring. The LCD window on the paged
handset indicates that an Intercom has come in.
3. To answer the call from you, the paged handset should open their
handset’s flip or press either
or
key.
4. When the paged handset answers you, speak to the speaker.
5. To end the call, press
or
key. The paged handset should
close the flip or press either
or
key to end the call.
Notes:
• If you enter a handset number that does not exist, the base sounds an
error tone and returns to the Standby mode.
• To cancel intercom, press
or
key.
• You can adjust the intercom ringer volume from 1 through 5 by
pressing
or
key while an intercom call
.
•
If you do not enter a handset number within 5 seconds after pressing
key on the base, the base pages all registered handsets and all
handsets ring four times. Using this feature, you can locate the
handsets.
From the Handset to the Base
1. Press
and then
key (the number of the base).
2. The handset and the base ring. The LCD window on the base indicates
that a intercom has come in with your handset number.
3. To answer the call from you, the base should press either
or
key.
4. When the base answers you, speak.
5. To end the call, close the flip or press either
or
key. On the
base, press either
or
key to end a call.
INT
INT
INT
MNO
INT
INT
INT
INT
INT
INT
INT
