Samsung SP-C802R, Руководство пользователя

Страница: 5 / 30

● To power ON: Press button until the unit beeps twice.
●
If the unit is not powered on even if you press button, place it on the charger. Later, it
will turn on automatically. Charge the unit for one day before using.
●
To power ON: Press and hold button in the standby state until the unit beeps.
9 8
Base set Installation
Telephone
Connection
Connect the
telephone to a
220V outlet.
Connect the
telephone to a
220V outlet.
Open the
battery lid. Put the battery
as shown in the
picture.
Remote set Installation
1
2
Put the battery
tight to the upper
part as shown in
the picture.
3
Close the
battery lid.
4
Placing the battery in the remote set
Battery Life
●
We guarantee the battery life of 6 months from the
purchase.
●
Battery is a consumable, whose life is reduced along with
time. If the battery performance is reduced to the half the
initial performance, purchase a new battery.
To purchase a new battery, contact Supply Division at
Samsung Electronics Service Center.
;;
;;
;;
@@
@@
@@
€€
€€
€€
ÀÀ
ÀÀ
ÀÀ
How to use battery?
●
Charge the remote set for more than 24 hours
before initial use.
●
If you do not use the telephone for a long
time, make it sure to separate the battery
from the remote set and keep it safe.
To power ON/OFF the remote set
● After installation, pick up the handset and make it sure that dial tone is transmitted.
●
If there is no dial tone, check the connections of the telephone line and the power line.
●
This product should be operated at 220V only.
● Place the remote set on the charger and check whether CHARGE light turns on.
●
Press button and check whether dial tone is transmitted.
●
If there is no dial tone, check whether the base set has been properly installed.
What is the standby state?
The stadnby state refers to the state in which no call is made or answered and the unit is
ready for ringing.
(State in which the user does not speak over the phone and the telephone is waiting for
operation.)
Telephone Installation
DC 12V 500mA
DC 12V 500mA