Making intercom
17
16
To reduce :
To increase :
Adjusting ring volume
for Remote set
Adjusting the ring volume
�
�
When adjusting the volume, you can
check out the change of volume
from the bar graph on the screen.
To reduce :
To increase :
�
�
●
Press in the above order
�
�
�
�
●
Press in the above order
To do so, do the following.
▼
You can adjust the voice to either high, medium or low.
Adjusting the handset receiving volume (during a call)
Selecting a ring type
You can hear
the selected
ring type.
It will return to
standby mode
after a beep
sound.
1
2
On the screen is
displayed 1, 2 or 3
3
Select the
number you
want.
●
There are 3 different kinds of ring types.
�
�
●
You can switch to the handset in the
base set by picking up the handset.
●
You can switch to the handset in
the base set by picking up the
handset.
When you hear the bell and
press button from the
Remote set, the call will be
connected with the speaker
phone in the base set.
●
If you press , or do not press
any button for 2 seconds, all Remote
sets will then begin to ring.
Press the number of the
Remote set.
Calling from to
1
2
3
When you hear it ringing, press button
from the base set, the call will then be connected
to the Remote set.
1
2
●
Separate from external calls, you can make intercom between the handset or speakerphone of the base
set and the Remote set. In this particular case the calls are not charged.
(press the following buttons in order)
Calling from to
(press the following buttons in order)
When an external call is coming during an internal call, it will not ring. However, if you happen to
hear the ringing coming from the additionally registered Remote set, then you may end the internal
call and receive the external call.
∙
Press the Intercom button
in standby mode.
∙
Press the Intercom button
in standby mode.
NOTE
You can set between low and high.
●
The default setting is high.
Basic features
