NETWORK PTZ CAMERA
User Guide
57
ᐭG
Stabilizer : The stabilizer compensates for camera vibration as a result of wind and other
causes.
ÿ
Others
ᐭ
Prop. P/T
This commands the camera to change the Pan and Tilt speed automatically according to
the current zoom position. Moving the joystick clockwise (Tele) slows down and
counterclockwise (Wide) accelerates the Pan and Tilt speed, allowing detailed adjustments.
Turning this “OFF” executes the optical 1x zoom speed regardless of the zoom position.
ᐮ
Digital Flip
Digital Flip is useful to monitor a moving object or a person passing directly under the
camera.
When an object or a person passes directly under the camera, the camera’s tilt angle
automatically adjusts and follows the object or person over 100 degrees to the other side
of the tilt area without panning. The screen inversion occurs at 100 degrees or higher
and is digitally adjusted.
ᐯ
Image Hold
While the camera is operating in the Group or Tour Search mode, this feature pauses the
monitoring screen at a previous preset until the camera reaches the next preset location.
This is useful to help the screen observer maintain a constant watch and to monitor
multiple locations within a network.
ᐰG
Power On Resume
This is useful when the power is disconnected and reconnected due to power failures or
other power interruptions.
ÿ
P/T Setting
t5IJTGVODUJPOVTFTUIFEJHJUBM[PPNJUDBVTFTEFHSBEBUJPOJOWJEFPRVBMJUZ
t5IFTUBCJMJ[FSEPFTOPUBDUJWBUFBUMPXMJHIUMFWFMT
t5IFTUBCJMJ[FSEPFTOPUBDUJWBUFXIFOUIFDBNFSBJTDBQUVSJOHBOBSFBXJUIBNPOPUPOPVTQBUUFSO
such as the sky or a white wall.
Caution
ᐮ
Dome Cover
These settings are to optimize the camera’s focused object position according to the
dome cover type.
- Inner : Select when using the camera without a housing. (Factory Release mode)
- Outer : Select when using this camera with a housing.
- None : Select when using the camera without the dome cover.
