NETWORK PTZ CAMERA
User Guide
62
Chapter 4. Using Web Viewer
To save a desired location for the Pan/Tilt or Zoom/Focus operation along with detailed
camera settings for the location, configure the following options.
Category
Description
Number
Select a number to identify a preset. (Preset numbers 1 to 255 are available.)
Name
Name a preset.
Move
Moves to a selected preset when its number is selected.
Edit
Enables detailed camera settings to be configured for a preset.
Add
Saves a preset; move to a desired location for the Pan/Tilt or Zoom/Focus operation, enter
a preset number and name, and then press the Add button to save the location as a
preset.
Delete
Deletes an existing preset; select a preset number, and then press the Delete button.
t/FXTFUUJOHTBSFTBWFEPOMZJGZPVDMJDLUIF
button on the right of the screen.
To configure detailed camera settings for a preset, select a preset number, and then move the
camera to the preset before pressing the
button.
ÿ
Preset Setup
ÿ
Sequence Setup
Category
Description
Swing
Commands the camera to move between 2 selected presets, monitoring the route.
Group
Recalls groups of multiple preset locations consecutively. A group can contain up to
255 presets.
Tour
Recalls groups of presets consecutively in an orderly manner. Up to 6 groups can be
listed for this function.
Trace & Auto Run
Trace saves and reactivates patterns of custom camera movements. Up to 4
movement patterns can be memorized.
Auto Run commands the camera to automatically perform a preset sequence action if
no command has been entered via the controller for a while.
You can configure detailed sequence settings for each camera mode. Available camera
modes are Swing, Group, Tour, Trace, and Auto Run, and they are described in the chart
below.
Caution
