English
_63
●
SETUP SCREEN
4.
Specify the <
Activation time
>.
•
Always : Always check if an alarm occurs. It activates in operated mode when the
alarm occurs.
If set to Always, the activation time cannot be changed.
•
Only scheduled time : Check if an alarm occurs at a specified day of the week for
a specified time period. It activates in operated mode when the alarm occurs.
•
[
] : Reset all settings.
5.
Specify an operation that will perform if an alarm occurs.
•
Alarm output : Select whether to set the alarm output if an alarm is incoming, and
specify the alarm output time.
•
FTP sending : Specify the use of FTP transfer in the alarm input setup.
•
E-mail sending : Specify the use of email transfer in the alarm input setup.
•
Record : Specify the use of recording in the alarm input setup.
6.
When done, click [
Apply (
)
].
VA / MD
1.
From the Setup menu, select the
<
Event (
)
> tab.
2.
Click <
VA / MD
>.
❖
Motion Detection (MD)
1.
Select a motion detection mode.
2.
Specify the use of motion detection.
3.
Select a sensitivity level of the motion
detection.
Higher the sensitivity is, the smaller
motion is detected.
4.
Use the drag-and-drop method to
specify the detection area on the video.
You can specify up to 4 motion detection
areas.
5.
Specify the activation time and activation
condition.
For more information about <
Activation
time
> and <
Action
>, refer to “
Alarm input
”. (page 62)
6.
When done, click [
Apply (
)
].
Содержание SNO-7080R
Страница 1: ...NETWORK CAMERA User Manual SNO 7080R ...
Страница 101: ......
