English
_51
●
SETUP SCREEN
Smart codec setup
Set a desired area of the video incoming from the camera as ROI area and specify the
detection sensitivity for the area.
1.
From the Setup menu, select the
<
Audio & Video (
)
> tab.
2.
Click <
Smart codec setup
>.
3.
Select ROI Area.
•
Face Detection : Active if a face is
recognized on the monitoring screen.
M
Face detection can be worked when
the following conditions are satisfied:
-
Face Direction : R/L ±45 upward
-
Rotation Angle of Face : Length ±30, Width ±60
-
Minimum Size of Face : Larger than 20×20, based on the resolution of 320×240
•
Manual : Specify the ROI area to monitor manually.
4.
Select a quality and detection sensitivity for the ROI area.
5.
If manually specifying the ROI area, select a desired area with the mouse pointer and
drag it as much as you want.
You can specify up to 5 distinct areas.
6.
To cancel your selection, simply click [
].
7.
When done, click [
Apply (
)
].
J
The Smart codec will not be active if it is set to <
Off
> in <
Video profile
>. (page 42)
Содержание SNO-7080R
Страница 1: ...NETWORK CAMERA User Manual SNO 7080R ...
Страница 101: ......
