Samsung SND-7080 Скачать руководство пользователя страница 17

Страница: 17 / 108

English

_17

●

INSTALLATION & CONNECTION

INSTALLATION (SND-7080F)

Disassembling

Take the camera body with one hand and take the
top cover with the other hand. Then, turn the cover
counter clockwise to remove it.

Installation

Use the provided template to drill one hole for
the camera, and one for the screw (5 mm in
diameter, at least 35 mm in depth), and insert
the plastic anchor (HUR 5) to the end of the
screw hole.

Connect and arrange the necessary cables
lest that they should be damaged or twisted
while installing the camera.

Insert the camera body into the hole so that it
fits to the camera hole, and fix the body using
the ASSY tapping screws (TH M4xL30). (x3)

Refer to “Adjusting the monitoring direction for the camera” to adjust the lens in a
desired direction.

Close the top cover.

Fit the top cover into the fixing tips of the camera body and turn the cover clockwise.



Top cover

Camera Body

Содержание SND-7080













































































































Результаты поиска

Содержание SND-7080

Отзывы:

Похожие инструкции для SND-7080

Бренды по названию

Популярные бренды

Samsung SND-7080, Руководство пользователя

Результаты поиска

Содержание SND-7080

Отзывы:

Похожие инструкции для SND-7080

Бренды по названию

Популярные бренды