English
_53
●
SETUP SCREEN
Sens-up limit : Set the work condition to Auto mode in a low contrast scene.
Iris : You can set the camera iris to AUTO or MANUAL to your preference.
For a camera with the shutter type of ESC, the iris will operate properly only if it is set to
<
Manual
>.
If the iris is set to <
Auto
>, the shutter speed will be fi xed to 1/30 second in ESC mode.
AGC mode : Specify the level according to the screen luminance.
Indoor/Outdoor : Select Indoor or Outdoor for the installation environment.
Special Setup
Select <
Special
>.
Select each item and set it properly.
Day & night : You can switch the
mode to adjust the black and white
level as well as the colors.
Color : Always displays the video in
colors.
B/W : Always displays the video in
black and white.
Auto : Displays in color mode during normal daytime and switches to black and
white mode in a low contrast scene at night.
If you set the AGC mode to OFF from <
Exposure
>, the AUTO DAY/NIGHT mode will be disabled
accordingly.
Externel B/W : Control the image modes of Color and B/W when an external IR
is synchronized via the Alarm In port.
Dwell time : This is the time while each applicable lighting condition is kept in
order to enable the switch between day and night modes.
Duration : Adjust the brightness of the lighting where the mode switch occurs.
Sharpness mode : Adjust the overall sharpness of the image.
If selecting <
On
>, you can adjust the sharpness of the image.
Sharpness level : The higher the level is, the sharper and clearer the outline of the
image becomes.
Gamma : Adjust the contrast of the image.
Color level : Adjust the color level of the image.
Alarm in : Set the image to Color or B/W depending on the state of the alarm
sensor in sync with the IR.
If the Day & Night mode is set to Externel B/W, the alarm-in function of the event-alarm input page
will be disabled.
•
•
•
•
1.
2.
•
-
-
-
-
•
•
•
•
•
•
•
