Samsung SMT-i6020 Скачать руководство пользователя страница 88

Страница: 88 / 95

_ © SAMSUNG Electronics Co., Ltd.

Screen

Trouble

Solution

Nothing is displayed on the LCD
screen during the call.

Check if the phone cables are properly connected to
the ports. (Please refer to the section on

‘Phone

Installation

’ under ‘Preparations’ in this user manual.)

General

Trouble

Solution

The phone does not ring or the
sound is too quiet.

By pressing the

[Volume]

button, make the phone

bell volume larger. (Please refer to the

‘Volume

Control

’ section under ‘Basic Functions’ in this user

manual.)

The sound is not clear due to
interference or crossed lines.

If you were using the speaker, try using the handset.

There are a lot of echoes
coming from the speaker.

When you broadcast, the noise from the speaker may
cause echoing.

Maintain a distance of 1 m from the phone.

Caller ID does not appear on
the LCD screen.

- Ask the service provider whether the Caller ID

service is activated.

- If the user has requested to be removed from the

Caller ID service, it will not appear on the screen.

- If the user is calling from an area where the Caller

ID service is not valid (e.g. making an international
call), Caller ID will not appear on the screen.

- If the user calls from a payphone, Caller ID will not

appear on the screen.

- If the user received invalid information from the

service provider, Caller ID will not appear on the
screen.

- If the service provider does not provide the Caller ID

service, Caller ID will not appear on the screen.

You are unable to access the
main menu from the call forward
or rejection screen.

Set the UC dial to a central position then you will be
able to access the menu.

Содержание SMT-i6020
































































































Результаты поиска

Содержание SMT-i6020

Отзывы:

Похожие инструкции для SMT-i6020

Бренды по названию

Популярные бренды

Samsung SMT-i6020, Руководство пользователя

Результаты поиска

Содержание SMT-i6020

Отзывы:

Похожие инструкции для SMT-i6020

Бренды по названию

Популярные бренды