SMT-i SERIES
QUICK REFERENCE DOCUMENT
ADMINISTRATOR DOCUMENT
MAY 2010
3
Quick Overview
In order to set up the phone or perform the software upgrade, the administrator needs
to enter the phone to the engineering mode.
i3105/i5210/i5220/i5230
i5243
Initial setup
•
Enter to the engineering mode
•
Select
“
Easy Install
”
menu to set
up the phone
•
Power up the phone and
follow on screen instructions
Re-configuration
•
Enter to the engineering mode
•
Select
“
Easy Install
”
menu to set
up the phone
•
Enter to the engineering mode
•
Select
“
Easy Install
”
menu to
set up the phone
Software Upgrade
•
Run
TFTP
server software on PC
•
Run
TFTP/HTTP
server
software on PC
Method 1
: pull from
the phone (phone is
required to register
to the system)
•
Enter to the engineering mode
•
Select
“
S/W upgrade
”
•
Select
“
TFTP Server
”
and enter the
PC IP address
•
Start upgrade
•
Enter to the engineering mode
•
Select
“
S/W upgrade
”
•
Select
“
TFTP or HTTP
”
type
and enter the PC IP address
•
Start upgrade
Method 2:
push
from MMCs (phone is
required to register
to the system)
•
MMC 841:
o
Enter PC (server) IP
address
o
Enter 4 digits software
version
•
MMC 840; enable and start
software upgrade
•
MMC 841:
o
Enter PC (server) IP
address
o
Enter 4 digits software
version
•
MMC 840; enable and start
software upgrade
Method 3:
use USB
memory (phone is
not required to
registered to the
system)
•
Copy software to the
root
directory of the USB memory
•
Plug-in USB memory to the
phone
•
Enter to the engineering mode
•
Select
“
Software upgrade
”
•
Select
“
USB
”
type
•
Start upgrade