SMT-i SERIES
QUICK REFERENCE DOCUMENT
ADMINISTRATOR DOCUMENT
MAY 2010
2
Introduction
This quick reference document briefly describes the steps for administrator to set up
the SMT-i3105/5200 series IP devices and to upgrade software on these devices.
These new SMT-I series of IP devices required to have OfficeServ 7000 MP software
v4.46 and up. No license is required to register and to operate these devices.
Preparation:
•
OfficeServ 7000 system with v4.46 and up software
•
Connect OfficeServ 7000 MP, MGI, PC and SMT-ixxxx to the same data network
•
Power SMT-ixxxx devices either by PoE or AC power adaptor
MMCs:
•
MMC 727: check software version number
•
MMC 830: MP IP address
•
MMC 840: IP set information
•
MMC 209: AOM paring
•
MMC 722: Station key programming
Two methods to enter to the
engineering mode
:
1.
Initial setup
a.
Press and hold * key
while powering up SMT-i3105/5210/5220/5230
phone
i.
There is no need to press any key while powering up SMT-i5243.
When powering up the SMT-i5243 the first time, it will automatically
enter the installation menu.
2.
Subsequent setup
a.
Press *153#
while phone displays the phone information. Follow the
following sequence to display the phone information.
i.
Menu -> Settings -> phone info; for i3105/5210/5220/5230
ii.
Menu -> Phone -> phone information; for i5243