14
3. Disassembly and Reassembly
3-4 Replacement of Fuse
Parts
Explaination Photo
Explaination
Grille
1.
Disconnect oven power .
2.
Remove Grille .
1)
Remove 3 screws . (Flat Head)
2)
Slide the Grille to the left, then pull it
straght out .
Arrange
the screw hole of the Grill with Outer
Panel’s when you reassemble the Grill .
Front
Bracket
3.
Remove screws securing the control-box
assembly and remove control box .
4.
Remove Front Bracket .
Fuse
The fuse is located on the noise filter .
5.
Replace the fuse .
6.
When 20A fuse blows out by the operation
of interlock monitor switch failure, replace
the primary interlock switch, secondary
interlock switch, door sensing switch,
interlock monitor switch and power relay .
7.
When the above four switches operate
properly, check if any other part such as
the control circuit board, blower motor or
high voltage transformer is defective .
PRECAUTION
Be sure to ground any static electric charge in your body and never touch the noise filter when you remove
the Grill .
