background image

2

Contents

1. Placement of the mounting plate .   .   .   .    8

A.  Removing the microwave oven from the 

carton/Removing the mounting plate . . 8

B. Finding the wall studs.   .   .   .   .   .   .   .   .   .   . 8

C. Determining wall plate location under your 

cabinet  . . . . . . . . . . . . . . . . . . 9

D.  Aligning the wall plate.   .   .   .   .   .   .   .   .   .   10

2. Ventilation types (choose a, b or c) .   .   .  11

A.  Outside top exhaust (vertical duct).   .   .   12

A1. Installation procedure for exhaust 

adaptor and proper damper operation 

check . . . . . . . . . . . . . . . .  12

A2. Adjust the exhaust adaptor  . . . .  12

B. Recirculating (non-vented ductless) . .  12

B1. Adapting the microwave blower for 

recirculation  . . . . . . . . . . . .  12

B2. Installing the charcoal filter  . . . .  13

C. Outside back exhaust (horizontal duct)   14

C1. Adapting the microwave blower for 

outside back exhaust  . . . . . . .  14

3. Installation . . . . . . . . . . . . . . . .  15

A.  Prepare the rear wall for outside back 

exhaust . . . . . . . . . . . . . . . . .  15

B. Attach the mounting plate to the wall .  15

C. Use the top cabinet template to prepare 

the top cabinet . . . . . . . . . . . . .  16

D.  Mount the microwave oven .   .   .   .   .   .   .   16

E.  Connect the ductwork for outside top 

exhaust . . . . . . . . . . . . . . . . . .17

4. Before you use your microwave  . . . .  18

Step-by-step installation guide

Important safety instructions . . . . . . .   3

Electrical requirements  . . . . . . . . . .   3

Hood exhaust .   .   .   .   .   .   .   .   .   .   .   .   .   .   .   .    4

Damage - Shipment/Installation.   .   .   .   .   .    6

Parts included  . . . . . . . . . . . . . . .   6

Tools you will need . . . . . . . . . . . . .   7

Mounting space.   .   .   .   .   .   .   .   .   .   .   .   .   .   .    7

General information

SMH1927_XAA_DE68-04108A-03_EN.indd   2

2017-11-02     2:27:40

Содержание SME21K6000ASAA





















Отзывы: