SmartThings
33
3
Tap on a location.
4
Tap the Samsung Connect’s name.
5
Tap
Z-Wave Utilities
→
General Device Exclusion
.
If the Samsung Connect is included into another network, Group 1 is used to provide
Lifeline services and the Samsung Connect will send the Device Reset Locally signal
to associated nodes in the event that the Samsung Connect is reset by the consumer.
Using the Dashboard
Introduction
On the dashboard, you can access the Smart Home Monitor menu and customise settings
for monitoring your home. After customising your settings, you can your home’s status
information.
Customising the Smart Home Monitor menu
1
On the Apps screen of your mobile device, tap
SmartThings
→
.
2
Tap
→
Setup
.
3
Select an alarm type and customise the settings.
•
Security
: Set security alarms and notification settings.
•
Smoke
: Set smoke alarms and notification settings.
•
Leaks
: Set gas leak alarms and notification settings.
•
Custom
: Create monitoring rules to keep you informed about your home’s status.
When you are finished, the line under the alarm’s name will change to green to indicate
completion.
