MINI DOME CAMERA
USER
’
S MANUAL
8
MINI DOME CAMERA
USER
’
S MANUAL
12
MINI DOME CAMERA
USER
’
S MANUAL
9
MINI DOME CAMERA
USER
’
S MANUAL
13
MINI DOME CAMERA
USER
’
S MANUAL
10
MINI DOME CAMERA
USER
’
S MANUAL
14
MINI DOME CAMERA
USER
’
S MANUAL
11
MINI DOME CAMERA
USER
’
S MANUAL
15
•WheninstallingthecameraonaceilingnottodisturbadjustmentofTiltBaseanglefix
theBNC-PowerCableonthePanBaseclip.
Notes
Connection to Power
•
Connect the adapter to the power input connector as shown in the figure below.
Use a DC 12V. (The Adapter is not provided with the Dome Camera.)
DOMECamera
Adapter(notprovided)
PowerInputConnector
DOMECamera
BNC-Power Cable
Pan Base Clip
Connection to Monitor
•
As a connecting method varies according to instruments, refer to the manual supplied
with the instrument.
• Connect the cable after power is turned off.
• Set the 75
Ω
/ Hi-Z selection switch. If it is a intermediate device, switch it to Hi-z
and if it is final device, switch it to 75
Ω
. (Please refer to the Monitor Manual.)
Resistance of copper wire [at 20C
º
(68
º
F)]
• As the voltage drop according to the length of the cable in the above table,
a camera may malfunction if there is an excessively long cable run.
* Voltage for camera operation: 12V DC ±10%
* Voltage drops in the above table are variable according to types of cable manufacturer.
For DC Power Type
Connect the VIDEO-OUT jack to the VIDEO-IN jack of monitor.
•AfterlooseningPanorTiltBaseholdingscrews,adjustitsangle.Andthentightenscrewsagain.
•Incaseofadjustingthetilting,donottakethelensforpreventinghysicalshocks.PleasetaketheTiltBase.
•Thisdomecameraistobeinstalledontheceilingbyfactorydefault.
Notes
Panning & Tilting Control
You can adjust the Panning and Tilting angle freely. (Panning angle: 360
º
, Tilting
angle: 20
º
~90
º
)
1) Adjustment Panning angle: After attaching the dome camera to a ceiling, adjust the
panning angle for better monitoring area by rotating the Pan Base. The panning angle
can be adjusted 360
º
freely.
2) Adjustment Tilting angle: After attaching the dome camera to a ceiling, adjust the
tilting angle for better monitoring area by rotating the Tilt Base. The tilting angle
can be adjusted to 20
º
from 90
º
freely. (based the ceiling surface)
Pan Base
You can rotate the lens
from 360
Tilt Base Holding
Screws
Tilt Base
You can adjust up and down
the camera (20
º
~90
º
).
Pan Base
Holding Screw
If you have trouble operating your camera, refer to the following.
If the guidelines do not enable you to solve the problem, contact an authorized
technician.
◾
The image on the screen is dim.
• Check if the lens are stained. If dirty, clean the lens with soft, clean cloth.
• The image is dimmer at night than daytime. If the focus is not right, adjust it at
daytime.
◾
The contrast on the screen is too weak.
• Adjust the contrast feature of the monitor.
• If the camera is exposed under too strong light, change the camera position.
• Adjust the lens BACK FOCUS again.
◾
The camera is not work properly, and the surface of the camera case is hot.
• Check that you have connected the camera to a proper power (DC 12V)
Application of Council Directive(s)
89 / 336 / EEC
Manufacturer's Name
SAMSUNG TECHWIN CO., LTD
Manufacturer's Address
SAMSUNG TECHWIN CO., LTD
42, SUNGJU-DONG CHANGWON-CITY,
KYUNGNAM, KOREA, 641-120
European Representative Name
European Representative Address
Equipment Type/Environment
MINI DOME CAMERA
Model Name
SID-53/56
Beginning Serial NO.
S6300001
Year of Manufacture
2009. 01. 01
Conformance to
EN 50081-1 : 1992
EMC-Directive 89/336 EEC and 92/31/EEC
EN 50130-4 : 1996
We, the undersigned, hereby declare that the equipment specified above conforms to the above
Directive(s).
Manufacturer
SAMSUNG TECHWIN CO., LTD
Legal Representative in Europe
Signature
Signature
Full Name
HAN SEUG KIM
Full Name
Position
QUALITY CONTROL MANAGER
Position
Place
CHANGWON, KOREA
Place
Date
2009. 01. 01
Date
Monitor
Intermediate
BNC
