background image

86_ appendix

a notice placed by the copyright holder or other 

authorized party saying it may be distributed 

under the terms of this Lesser General Public 

License (also called “this License”). Each licensee 

is addressed as “you”.
A “library” means a collection of software 

functions and/or data prepared so as to be 

conveniently linked with application programs 

(which use some of those functions and data) to 

form executables.
The “Library”, below, refers to any such software 

library or work which has been distributed under 

these terms. A “work based on the Library” 

means either the Library or any derivative work 

under copyright law: that is to say, a work 

containing the Library or a portion of it, either 

verbatim or with modifications and/or translated 

straightforwardly into another language. 

(Hereinafter, translation is included without 

limitation in the term “modification”.)
“Source code” for a work means the preferred 

form of the work for making modifications to 

it. For a library, complete source code means 

all the source code for all modules it contains, 

plus any associated interface definition files, 

plus the scripts used to control compilation and 

installation of the library.
Activities other than copying, distribution and 

modification are not covered by this License; 

they are outside its scope. The act of running a 

program using the Library is not restricted, and 

output from such a program is covered only if its 

contents constitute a work based on the Library 

(independent of the use of the Library in a tool for 

writing it). Whether that is true depends on what 

the Library does and what the program that uses 

the Library does.

1.

 You may copy and distribute verbatim copies 

of the Library’s complete source code as you 

receive it, in any medium, provided that you 

conspicuously and appropriately publish on 

each copy an appropriate copyright notice and 

disclaimer of warranty; keep intact all the notices 

that refer to this License and to the absence 

of any warranty; and distribute a copy of this 

License along with the Library.
You may charge a fee for the physical act of 

transferring a copy, and you may at your option 

offer warranty protection in exchange for a fee.

2.

 You may modify your copy or copies of the 

Library or any portion of it, thus forming a work 

based on the Library, and copy and distribute 

such modifications or work under the terms of 

Section 1 above, provided that you also meet all 

of these conditions:

a) The modified work must itself be a software 

library. 

b) You must cause the files modified to carry 

prominent notices stating that you changed 

the files and the date of any change. 

c) You must cause the whole of the work to 

be licensed at no charge to all third parties 

under the terms of this License. 

d) If a facility in the modified Library refers to a 

function or a table of data to be supplied by 

an application program that uses the facility, 

other than as an argument passed when 

the facility is invoked, then you must make 

a good faith effort to ensure that, in the 

event an application does not supply such 

function or table, the facility still operates, 

and performs whatever part of its purpose 

remains meaningful. 

(For example, a function in a library to compute 

square roots has a purpose that is entirely 

well-defined independent of the application. 

Therefore, Subsection 2d requires that any 

application-supplied function or table used by 

this function must be optional: if the application 

does not supply it, the square root function must 

still compute square roots.)
These requirements apply to the modified 

work as a whole. If identifiable sections of that 

work are not derived from the Library, and can 

be reasonably considered independent and 

separate works in themselves, then this License, 

and its terms, do not apply to those sections 

when you distribute them as separate works. 

But when you distribute the same sections as 

part of a whole which is a work based on the 

Library, the distribution of the whole must be on 

the terms of this License, whose permissions for 

other licensees extend to the entire whole, and 

thus to each and every part regardless of who 

wrote it.
Thus, it is not the intent of this section to claim 

rights or contest your rights to work written 

entirely by you; rather, the intent is to exercise 

the right to control the distribution of derivative or 

collective works based on the Library.
In addition, mere aggregation of another work 

not based on the Library with the Library (or with 

a work based on the Library) on a volume of a 

storage or distribution medium does not bring 

the other work under the scope of this License.

3. 

You may opt to apply the terms of the ordinary 

GNU General Public License instead of this 

License to a given copy of the Library. To do 

this, you must alter all the notices that refer to 

this License, so that they refer to the ordinary 

GNU General Public License, version 2, instead 

of to this License. (If a newer version than version 

2 of the ordinary GNU General Public License 

has appeared, then you can specify that version 

instead if you wish.) Do not make any other 

change in these notices.
Once this change is made in a given copy, it is 

irreversible for that copy, so the ordinary GNU 

General Public License applies to all subsequent 

copies and derivative works made from that 

copy. 
This option is useful when you wish to copy part 

SHR-6042_Eng.indb   86

2009-06-05   오전 11:24:01

Содержание SHR-6040

































































































Отзывы: