Samsung SHR-2080, Руководство пользователя

Страница: 31 / 211

2-14
English
5. When mounting an additional HDD, the primary master has to be mounted.
In general, HDD should be installed as the primary master of IDE, and the CD-RW drive
should be installed as the secondary master of IDE.
Mount the HDD you want to add after setting the master/slave jumpers in the proper order.
6. Re-mount built-in HDD bracket-HDD to the place where it was separated from. Place the
bracket-HDD (A) so that all the five mounting spots on the bottom and the bracket-HDD's
mounting holes are perfectly aligned, then slide it toward the outside of the product and
tighten the screws.
For the bracket-HDD (B), place it so that all the four mounting spots on the bottom and the
bracket-HDD's mounting holes are perfectly aligned, then tighten the screws.)
When adding one - Primary slave (mount on
the top of the bracket that
has a built-in HDD when
coming out of factory.)
Mount the HDD to the bracket-HDD with (A)SCREW-SPECIAL (BWH,6-32UNC,L10.5) and
(B)SCREW-TAPTITE (BH,+,S,M3,L6,ZPC) (4 spots) that was provided as an accessory.
(The screws have to be tightened so that it doesn't vibrate loose.)
❉
(B)SCREW-MACHINE is provided when purchasing the HDD.
When adding two - Secondary Slave (mount
to the upper bracket of the
built-in CD-RW.)
SCREW
DRIVER
SHR-2160/2162/2080/2082-E-0 10/18/07 3:55 PM Page 2-14