SAMSUNG Proprietary-Contents may change without notice
Exploded View/Disassembly&Assembly Instructions
5-11
This Document can not be used without Samsung's authorization
1)
Attach rubber so that it may not be projected to
outer block of PCB.
1) Take care so that Sponge may not infringe to the
Sub LCD and rubber.
1) If some dust are covered on LCD, it should be
removed by alcohol.
1) Be careful not to get a damage of cases.
1) During Solder speaker and vibrator,
concern about polarity.
1) paint a little of adhesive on
soldering parts.
9
10
11
1) Attach Rubber like picture.
1) Attach Sponge like picture.