5.
Remove the PCR. Figure 10
6.
Clean the PCR with your normal PCR cleaner.
WARNING:
Do not clean the OEM PCR with alcohol, as this will remove the conductive coating on the
roller. IF the PCR is an after market, follow the cleaning methods recommended by the manufacturer.
If the PCR is an OEM, we recommended it be cleaned with your standard PCR cleaner
7.
With the toner hopper away from you, remove the three screws on the left side end cap. Remove the
end cap. See Figure 11
8.
There are 3 screws on the PCR cleaner Assy. Remove them and gently pry the blade up. Be very
careful not to break off the alignment tabs. We have found it best to lift up from both sides when
removing this blade. See Figures 12 & 13
FIGURE 8
FIGURE 9
FIGURE 10
FIGURE 11
Page 4 of 11
Summit Laser Products - Samsung SF-5100 Toner Cartridges
4/21/2008
http://www.summitechnologies.com/docs/0307/0307.asp