1.
Place the cartridge with the handle facing up. Remove the 4 top corner screws. See Figure 4
2.
Underneath the handle of the cartridge to the right and left, there are 2 plastic tabs GENTLY press them in, and lift the cover off.
See Figure 5
CAUTION:
The upper half of the toner hopper is being removed. If there is a lot of toner left in the hopper, it can dump out all
over! Vacuum the hopper clean.
3.
With the toner hopper facing away from you, remove the three screws on the right side end cap. Remove the end cap. See
Figure’s 6 & 7
4.
Also on the right side there is a series of gears under the end cap. Make a note of the location of each
gear. One of the double gears will stay on the end cap. If you are careful, it is not necessary to remove
them. See Figure’s 8 & 9
FIGURE 4
FIGURE 5
FIGURE 6
FIGURE 7
Page 3 of 11
Summit Laser Products - Samsung SF-5100 Toner Cartridges
4/21/2008
http://www.summitechnologies.com/docs/0307/0307.asp
