COLOR CCD CAMERA
User’s Manual
18
COLOR CCD CAMERA
User’s Manual
19
Installation
Connecting to Monitor
Please connect the video output terminal located on the back of the camera to the
monitor.
•
The connection method varies depending on the type of monitor and accessories.
Please refer to the user's manual for each instrument.
•
Please turn off the power when connecting.
•
Please turn the 75Ω/Hi-Z switches of interim display devices to the Hi-Z position
and switch the end-of-line devices to the 75Ω position.
CCD Camera
CCD Camera
Intermediate
End monitor
Monitor
Connecting to Power
Since power specifications differ depending on the model, make sure you check your
model name and specifications before connecting power.
When the resistance value of copper wire is at [20
℃
(68
℉
)]
The recommended adaptor specification for
SDC-313BNA is AC 24V / 300mA.
The recommended adaptor specification
for SDC-313BPD is DC 12V / 500mA.
AC Power Type (AC 24V, 300mA)
DC Power Type (DC 12V, 500mA)
The Recommended adaptor specification
for SDC-313BP is AC 24V/300mA or DC
12V/500mA.
Dual Power Type (AC 24V / DC 12V)
Use AC230V, 50Hz power source
for SDC-313BPH.
High Voltage Type (AC230V, 50Hz)
•
As shown in the table above, voltage decreases as the wire gets longer.
Therefore use of an excessively long adaptor output line for connection to the
camera may affect the performance of the camera.
※
Note that adaptor is not supplied with accessory
※
Standard voltage for camera operation : DC 12V
±
10%
※
There may be some deviation in voltage drop depending on the type of wire and the manufacturer.
Copper wire size(AWG)
#24(0.22mm
2
)
#22(0.33mm
2
)
#20(0.52mm
2
)
#18(0.83mm
2
)
Resistance value(
Ω
/m)
0.078
0.050
0.030
0.018
Voltage drop(V/m)
0.028
0.018
0.011
0.006
