COLOR CCD CAMERA
COLOR CCD CAMERA
User’s Manual
User’s Manual
13
12
Name and Function of Each Part
Power Lamp
The power lamp turns on when power is properly supplied.
Power Input Terminal
Used to connect AC/DC power source.
Function Selection Switch
(1) ESC ON/OFF Switch
You can activate the ESC(Electronic Shutter Control) function. For details,
refer to
‘Auto IRIS Lens Selection Switch.’
(2) BLC(Backlight Compensation) ON/OFF Switch
This switch improves an image that is darkened because of backlighting. When
the lighting source is in the rear of an object, the object might be seen somewhat
dark. If you want to see the object clearly, turn this switch ON. The effective area
where backlight compensation is activate is fixed in the center of the screen.
(3) White Balance Control Mode
• ATW(Auto Tracing White balance; ON):
The camera automatically controls
the white balance in any environment.
• AWC(Auto White balance Control; OFF):
The white balance is automatically
adjusted in a specific environment.
(4) Sharpness
The switch emphasize the sharpness. To soften the edge turn this switch off.
(5) Flickerless: SDC-313 Series
Flickerless function. In this function, electronic shutter is fixed in 1/100sec
(1/120sec: PAL model). FL function can compensate the flicker caused by
power frequency, but set OFF in the area not using a 60Hz (50Hz: PAL
model) AC Power.
(6) INT/LL Switch: AC type
Used to choose INT or LL mode.
• INT(Internal) mode :
The camera may be operated independently with its
internal crystal control.
• LL(Linelock) mode :
It synchronizes the video signal between cameras using
the frequency of the AC power supply without external synchronous generator.
• Using auto iris lens, you must select ‘OFF’ of the ESC ON/OFF switch.
Notes
* Use the select switches on the rear of camera.
• Default setting is subject to change without notice.
• If the camera is DC power type, you can not use LL mode.
Notes
• The LL mode can be used in the areas of 60Hz(NTSC models), 50Hz(PAL models).
• There is no SYNC mode selection switch on the rear of DC power type.
• In case of NTSC model in using manual lens, the color tone could be oscillated
under indoor fluorescent light.
• To avoid this situation, we kindly recommend auto iris lens to you and set to ‘OFF’ in
ESC mode.
Notes
SDC-313,243(
영
) 2003.6.26 5:1 PM
페이지
12
Содержание SDC-243 SERIES
Страница 3: ...D CAMERA User s Manual 5 Contents 6 8 9 15 17 17 18 18 10 9 14 h Part 15 20 22 ...
Страница 13: ...MEMO ...
Страница 14: ...MEMO ...