Samsung SDC-243 SERIES, Инструкция по эксплуатации

Страница: 10 / 14

COLOR CCD CAMERA COLOR CCD CAMERA User’s Manual User’s Manual 19 18
Connection
Connect the VIDEO out jack to the monitor video in jack.
Connecting to Monitor
CCD Camera Monitor
• As the connecting method varies with the instruments, refer to the manual
supplied with the instrument.
• Connect the cable after power is turned off.
• Set the 75
Ω
/ Hi-Z selection switch as shown below if you have an intermediate
device.
CCD Camera
Intermediate End monitor
Connecting to Power
• The wire is polarized. Be sure to connect the wire that white line is on
covering to ‘-’ terminal and connect the
other one to ‘+’ terminal.
• Use DC 12V power source for SDC-
313(243)ND / PD
For DC Power Type
Each model has different power specification, please check the name of the model
and power specification before connecting to power source.
Please refer to the sticker identifying the model, which is attached on the product,
for power specification.
• The wire is non-polarized.
• Use AC 24V ~ 60Hz power source for
SDC-313(243)NA.
• Use AC 24V~50Hz power source for
SDC-313(243)PA
For AC Power Type
• Be sure to connect power after all the installation is done.
• Note that AC adaptor is not supplied with camera.
• Use only AC 24V UL listed class 2 power supply.
• Since the wire of DC power type is polarized, be careful when connecting it.
• Do not use power sources other than that specified.
Notes
SDC-313,243( 영 ) 2003.6.26 5:1 PM 페이지 18