_
setup
setup
DAy/NIGHT
You can specify a recording mode according
to the scene.
Select <
CAmERA SET
> - <
DAy/NIGHT
>.
Select a screen transition mode according
to the illumination, and set options as
appropriate.
DAY : Fixed to DAY mode, regardless of
the scene.
NIGHT : Fixed to NIGHT mode,
regardless of the scene.
If BURST is set to <
ON
>, the burst signal will be output along with the black-
and-white composite video signal.
AUTO : According to the luminance, this
will switch DAY to NIGHT mode, or vice
versa.
BURST : If set to <
OFF
>, the burst
signal will not be output in NIGHT mode.
DAY
NIGHT BRIGHTNESS : Specify
the brightness level switching from
COLOR to BW filter.
Adjusting from HIGH to LOW will cause
to switch the filter in a darker screen.
DAY
NIGHT DWELL TIME : Time
required to determine the filter switch.
NIGHT
DAY BRIGHTNESS : Specify the brightness level switching from
BW to COLOR filter. Adjusting from HIGH to LOW will cause to switch the
filter in a darker screen.
NIGHT
DAY DWELL TIME : Time required to determine the filter switch.
MASK AREA : If there exists a bright
spot light source in a night scene, you
can specify the size and position as
needed.
This will prevent an error in switching
filter, or failure to determine the filter
switch in a night scene where a bright
spot light source exists.
Any excessively bright area in a night
scene will be MASKed.
You can specify MASK 1 and 2 simultaneously.
1.
2.
-
-
-
-
-
-
AUTO
BURST
OFF
DAY
NIGHT
BRIGHTNESS
MID
DWELL TIME
2SEC
NIGHT
DAY
BRIGHTNESS
MID
DWELL TIME
5SEC
MASK AREA
1 2
MASK AREA
<SIZE>
<LOCATION>
DAY/NIGHT
AUTO
WHITE BAL
FOCUS MODE
ONEAF
ZOOM SPEED
[2]
DISPLAY ZOOM
OFF
DIGITAL ZOOM
OFF
DETAIL
[2]
V-SYNC
(INT)---
AGC COLOR SUP
MID
SCZ-2430P(D)-3430P(D)-ENG.indd 22
2010-5-26 16:42:26
