Adjusting Volume
Terminal Reset
Restricting Use of the Phone
Setting Warning Beeps
Changing the Lock Code
• To disconnect when you’re through, replace the handset.
NOTE: •
Be sure the phone’s ringer is enabled.
•
If you heard incoming call in picking up the handset, you can receive
the call by pressing any digit key.
1
First, check to see that your FWT Phone is turned on.
If the Power LED is lit, that means the power is on.
2
Pick up the handset.
●
You hear a dial tone.
3
Using the number keypad, dial the desired telephone number.
✐
When you finish inputting phone number, you have to press button.
If you don't press button, A call is not connected.
4
When the other person answers, begin your conversation.
5
To end the call, replace the handset.
NOTE:
• You can dial by 32 digit including .
• You can dial
emergency call
by pressing and holding without
inputting any digits.
You can't change the emergency call number.
MAKING CALLS
The terminal signals the telephone(s) to ring when an incoming call is
detected. Pick up the telephone handset and begin talking into the
microphone on the handset.
RECEIVING CALLS
Advanced Feature
SCW-R500 1/9/99 12:06 PM Page 12
