Samsung SCP-2370RH, Руководство пользователя

Страница: 69 / 80

English - 69
●
SETUP
IR ILLUMINATOR
In this menu, you can configure the IR Illuminator settings against a low contrast scene.
IR Mode: Specify the use conditions for the IR Illuminator.
Off: Does not use the IR Illuminator.
On: Activates the IR Illuminator.
DAY/NIGHT: Synchronizes the IR Illuminator with Day/Night
mode of the camera. Set the Day/Night mode so
that the product uses the IR Illuminator in the night
but does not use the illuminator during the day.
SENSOR: It will be in sync with the built-in brightness sensor of
the camera. See the next page for details.
TIMED: Set the IR Illuminator to activate/deactivate at a specifi ed
time. See the next page for details.
If the IR mode is set to ON and the LED turns on, the screen will be
displayed in black and white mode. If the LED turns off, the screen will
return to the previous screen mode.
If you set the IR mode to “DAY/NIGHT”, “Camera Setting>Day/Night>Mode”
will be set to “Auto”, which you cannot change the setting.
If you set the IR mode to Sensor or Time mode, you cannot change “Camera
Setting> Day & Night > Mode” as you want.
When used with IR illuminator, changing the zoom ratio automatically
synchronizes the IR illuminator. Note that synchronizing IR illuminator to
zooming may slow down in low temperatures.
If the ambient temperature increases too high, the IR LED can turn off to
prevent overheat of the product.
LED Max. Power: Specify the maximum output of the IR Illuminator.
LOW/MEDIUM/HIGH: The higher the level is, the brighter the indicator of the IR Illuminator becomes.
LED Pwr.Ctrl : Set to control the indicator’s output of the IR Illuminator.
AUTO : If the light from the IR indicator refl ects on a short-distant object (causing saturation), this
will lower the max power of the IR indicator.
MANUAL :Limit the output of the indicator to the value specifi ed in “LED Max. Power”.
Focus Limit: This is to restrict the auto focusing in a high zoom factor of the IR illuminator in order to
prevent unnecessarily extended duration of the auto focusing.
On: If the IR indicator turns on and the zoom factor is at least x21, the focus mode will be set to Manual
regardless of the focus mode settings.
In Sequence mode, the focus will return to the preset value regardless of the focus mode settings.
To guarantee exact operation at night, you must make the preset settings in advance.
If you use the joystick to control the Pan/Tilt/Zoom operations, the focus mode will switch to
“Manual”. However, if you still want to enable the auto focusing, press the A/F button on the
controller to activate the auto focus mode.
For optimal IR performance, the intensity of the IR LED will be set to High regardless of the user settings.
Off: The user focus settings and LED output settings will be applied.
z
-
-
-
-
-
M





z
-
z
-
-
z
-
-
IR Illuminator
IR Mode DAY/NIGHT
LED Max.Power MEDIUM
LED Pwr.Ctrl AUTO
Focus Limit ON
Main Menu
Camera Setting
Sequence Setting
P/T Setting
OSD Setting
Alarm Setting
IR Illuminator
Initialize
Password
Setting
Status
Æ