English_31
●
SETUP
INT : Internal Synchronization Type
LL : Power Synchronization Type, Line-lock
Press the Function Setup switch.
You can select a desired phase from 0 to 359 when select ‘phase’.
-
-
When using AC power at 60Hz(NTSC), 50Hz(PAL) frequency, you can use the LL type
synchronization.
When the power is DC 12V, the SYNC menu is fixed to the ‘INT’ mode.
If the VPS is set to ON, synchronization is fixed to INT.
INTellIGeNCe:
Commands the camera to motion-detect and trace an object.
MOTION : Select motion types to
detect.
OFF : Not being used.
DETECTION : Since the camera
detects motion without
any additional external
sensor, you can monitor
activity more efficient.
TRACKING : Commands the camera to
detect and trace a moving
object.
▶
FENCE :
▶
MODE : Determines whether to use
the fence selected in the
FENCE.
▶
TYPE : Two types, line and area, of
fences are available.
▶
COUNT : Displays the number of times that an object enters or leaves a
fenced area.
▶
FILL : Fill or remove color from the FENCE.
▶
POSITION : Defines the position and detection direction of a line or
fenced area.
-
INTELLIGENCE
▶
1.MOTION OFF
2.DETECT BOX
ON
3.ALARM OUT
OFF
4.DETECT AREA
5.MASK AREA
6.SENSITIVITY
IIIIIIII
IIIIIIIIIIIII
3
7.DET.SIZE
IIIIIIII
IIIIIIIIIIIII
3
8.RETURN
TRACKING
▶
1.FENCE FENCE1
2.MODE
OFF
3.TYPE
LINE
4.COUNT
OFF
5.FILL
OFF
6.POSITION
7.RETURN
You can select up to 4 FENCE.
1) LINE FENCE
- SEL POS : Selects a position from POS1,POS2.
- X POS / Y POS : Adjust the size and position of the selected line fence.
- DIRECTION
·
DIR1 : Detects objects moving left to right on the fence line.
