113
Before a new model phone is available for sale to the public, it must be tested and
certified to the FCC that it does not exceed the exposure limit established by the
FCC. Tests for each model phone are performed in positions and locations (e.g. at
the ear and worn on the body) as required by the FCC. For body worn operation, this
phone has been tested and meets FCC RF exposure guidelines when used with an
accessory that contains no metal and that positions the handset a minimum of
1.5 cm from the body. Use of other accessories may not ensure compliance with
FCC RF exposure guidelines.
The FCC has granted an Equipment Authorization for this mobile phone with all
reported SAR levels evaluated as in compliance with the FCC RF exposure
guidelines. The maximum SAR values for this model phone as reported to the FCC
are:
•
Head: 1.31 W/kg.
•
Body-worn: 0.558 W/kg.
SAR information on this and other model phones can be viewed on-line at
http://www.fcc.gov/oet/ea. To find information that pertains to a particular model
phone, this site uses the phone FCC ID number which is usually printed somewhere
on the case of the phone. Sometimes it may be necessary to remove the battery
pack to find the number. Once you have the FCC ID number for a particular phone,
follow the instructions on the website and it should provide values for typical or
maximum SAR for a particular phone. Additional product specific SAR information
can also be obtained at www.fcc.gov/cgb/sar.
UL Certified Travel Adapter
The Travel Adaptor for this phone has met UL 1310 safety requirements. Please
adhere to the following safety instructions per UL guidelines.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO SERIOUS
PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW
THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN THE U.S.A., USE AN ATTACHMENT PLUG
ADAPTOR OF THE PROPER CONFIGURATION FOR THE POWER OUTLET. THIS POWER
UNIT IS INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR HORIZONTAL
OR FLOOR MOUNT POSITION.
u410.book Page 113 Thursday, June 14, 2007 6:19 PM
