23
22
G
Ge
ettttiin
ng
g S
Stta
arrtte
ed
d
Power Save Mode
Your phone comes with a Power Save feature that will
automatically be activated if your phone is unable to
find a signal after 10 minutes of searching. While this
feature is active, the phone’s battery charge is
conserved. The phone will automatically recheck for a
signal periodically. To manually force the phone to
recheck for a signal, press any key. A message on the
display lets you know when your phone is operating in
Power Save mode.
Key Guard Mode
You can lock the keypad by pressing and holding
in Standby mode. By doing this, you can prevent
accidental key pressing.
To unlock the keypad, press and then . The
Lock icon displays in the display.
When you have an incoming call or an alarm occurs in
Key Guard mode, the mode is automatically deactivated
and the phone goes to Standby mode.
Note
: You can set the phone to automatically lock the
keypad after a specified period of time, in the
Auto key lock
menu (
Menu 7-2
). See page 88.
Call Functions
Making a Call
In Standby mode, key in the area code and phone
number and press
.
When entering a number, pressing allows you to
insert a pause or a hyphen. For more details about
pause dialing, see page 28.
Note
: If you have activated
Auto retry
menu (
Menu 7-5
),
the phone automatically retries to make the call
when the line is busy or the remote person does
not answer you.
Correcting the Number
To clear the ...
Press ....
last digit displayed
.
whole display
for more than one
second.
Ending a Call
When you want to finish your call, briefly press .
The call time, the length of the call, displays briefly and
the phone returns to Standby mode.
